{"id":313,"date":"2011-01-21T14:01:18","date_gmt":"2011-01-21T12:01:18","guid":{"rendered":"http:\/\/www.data-protector.org\/wordpress\/?p=313"},"modified":"2015-12-10T19:53:59","modified_gmt":"2015-12-10T18:53:59","slug":"eadr-mit-windows-2008-r2","status":"publish","type":"post","link":"https:\/\/www.data-protector.org\/wordpress\/2011\/01\/eadr-mit-windows-2008-r2\/","title":{"rendered":"EADR with Windows 2008 R2"},"content":{"rendered":"<p>In a former blog I reported howto recover a Windows 2003 Servers with Data Protector. As Windows Server 2008 R2 is more and more used in the data center, I show within this blog howto recover a Windows Server 2008 R2 with Data Protector using the function Enhanced Automated Disaster Recovery.<br \/>\n<span style=\"text-decoration: underline;\">Preparation:<\/span><br \/>\nWithin this howto the Enhanced Automated Disaster Recovery test is performed using a virtual machine. The howto is identical for physical and virtual maschines. As preparation a new virtual machine was installed, a full backup and some incremental backups were done.<br \/>\nPlease see all pictures as an example (machine names were replaced or blurred).<br \/>\nFor this article a blocksize of 64K was used on the tape devices!!!<br \/>\nThe article was created with the environemnt in Januar 2011 and valid for the mentioned products and versions only (patches from December and additional SSP applied). HP will\/may include the SSP in the next patch, the article has to be seen as an example. The usage of Cluster Shared Volumes and Virtual Hard Disks is not covered in this howto.<br \/>\n<span style=\"text-decoration: underline;\">Goal of this documentation:<\/span><br \/>\nThe goal of this documentation is to show one of different ways for disaster recovery with Data Protector 6.11, in this article it is shown for Windows 2008 R2. The howto can be seen as an example for different other disaster recovery processes.<br \/>\n<span style=\"text-decoration: underline;\">Usage:<\/span><br \/>\nThe disaster recovery process normally must be started using the MFC GUI on the cell server, as not all functions may available when not doing so; so Enhanced Automated Disaster Recovery ist not available when GUI is executed on a management station, the JavaGUI was not tested. For a successfull EADR Prozess it might be usefull when Windows 2008 R2 is installed on the cell server, within this articel I show a different way.<br \/>\n<span style=\"text-decoration: underline;\">Prerequsites Microsoft:<\/span><\/p>\n<ul>\n<li>Download WAIK 2.0 &#8211;> http:\/\/www.microsoft.com\/downloads\/en\/details.aspx?FamilyID=696dd665-9f76-4177-a811-39c26d3b3b34\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_01.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Uninstall all former versions of WAIK.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_02.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Unpack the ISO file (i.e. using winrar &#8211; www.rarlabs.com). Start the installation of the WAIK 2.0 for Windows 7 and Windows Server 2008 R2 using StartCD.exe\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_03.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Select Windows AIK Setup\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_04.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Select Next.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_05.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Accept the license agreement.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_06.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Select the installation folder.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_07.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Start the installation using Next.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_08.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Installation starts.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_09.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Completion.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_10.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<p><span style=\"text-decoration: underline;\">Prerequisites Data Protector:<\/span><br \/>\nInstall the current pacthes for Data Protector on the cell server and on the client to be used, during the test the following patches were applied (Data Protector 6.11 Patches December 2010): DPWIN_00475 \u2013 Core, DPWIN_00476 \u2013 CS, DPWIN_0077 \u2013 CC, DPWIN_00479 \u2013 MA and DPWIN_00481 \u2013 DA.<br \/>\nIn addition you need to log a case to get the Site Specific Patch SSPNT611_032. This patch is not available for the commons, to get this patch you need a valid support contract for Data Protector. The SSP must be installed on all Windows machines with installed module AUTODR. In this article the SSP was used on the test machine only. Please also read the included Textfile, you will find the procedure how to apply this patch.<br \/>\nAfter you extracted the SSP open the readme.pdf (technical whitepaper) as additional requirements are listed here to get the EADR process running.<br \/>\nCopy OMNIHOME\\bin\\drim to a safe location and move the files from the SSP to OMNIHOME\\bin\\drim (OMNIHOME = installation folder Data Protector &#8211; i.e.: c:\\program files\\omniback).<\/p>\n<ul>\n<li>Add a drive mapping to the system reserved volume or mount it into a NTFS folder. In our example we add drive Z:.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_11.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>A new backup specification was created using the following options:\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_12.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Options part 2\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_13.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Start a full backup including all volumes &#8211; CONFIGURATION, C:, &#8230;, Z: (system reserved volume), the backup should run without any errors.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_14.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<p><span style=\"text-decoration: underline;\">Restore part 1:<\/span><\/p>\n<p>Normally the EADR process for Windows Server 2008 should run on the cell server where Windows 2008 R2 and the WAIK 2.0 is installed too. As an alternative in our test a different system with Windows 2008 R2 Server, installed WAIK 2.0 and installed Data Protector GUI was used.<\/p>\n<ul>\n<li>Change to restore view and select tasks. Select the client to be recovered ans select the option Enhanced Automated Disaster Recovery.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_15.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>In the next screen the volumes involved in the DR process are shown, you can define the versions to be restored. There must be a version shown here, otherwise DR would not work. When starting the EADR process under Windows 2003, the versions are not listed, the DR cannot be started.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_16.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>With right-clicking select the needed version for the restore and repeat the steps for all remaining volumes.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_17.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>After you selected the volumes for the restore you have to select the image file, this can be generated using a restore or you can select an exisiting image file. In our example the image file was generated during the backup, this was copied from OMNIHOME\\Config\\Server\\dr\\p1s to the server we are using in our example, however you could also select a network path (this did not work in our environment as some firewalls are installed.).\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_18.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Now the installation folder for the ISO images needs to be selected and in addition the path to the installed WAIK, as from this folder the needed files are used. You may add additional drivers to be injected in the ISO file. Hint: With Data Protector 6.2 it becomes possible to use EADR with changed hardware and P2V.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_19.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>With Finish the ISO images will be created, this could take up to 15 minutes and is slower as it is the case for Windows 2003.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_20.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>At the end a message should be shown.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_21.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<p><span style=\"text-decoration: underline;\">Restore part 2:<\/span><br \/>\nWith the generated ISO file you could burn a CD (physical server), in our case the file was copied to the ESX host.<br \/>\nDuring the DR process the user DRM$ADMIN has to be added as an admin within Data Protector.<br \/>\nPlease keep in mind to have free tape drives befor you start the restore.<br \/>\nIf you recover within a virtualized environment, copy the ISO file onto the ESX host, as the destination select the same folder where the virtual machin is installed. Add the ISO file as CDROM drive for the virtual machine, make sure you have created a new disk and you use the identical configuration.<br \/>\nMake sure the the server to be recovered can lease a valid IP address from a DHCP server, if no IP address was assigned during the DR process the client will try to use direct attached drives for the restore. During the test we created a scope within DHCP server and reserved a IP address using the MAC address.<\/p>\n<ul>\n<li>During boot process press F12 to start DR.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_22.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Windows is starting and is loading the files.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_23.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Windows is starting.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_24.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>In DRM shell the network is started.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_25.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Other steps are done.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_26.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Select the recovery mode &#8211; in our case number 4 &#8211; Full Recovery.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_27.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>The disks are prepared.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_28.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Continued.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_29.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>The process hands over to phase 2 of the DR process.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_30.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>The SRD file is searched (with DP 6.2 it becomes possible to start the DR process using USB devices.).\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_31.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Start the restore with Finish.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_32.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>The Data Protector client is installed.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_33.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>The restore starts.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_34.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Restore continued.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_35.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Restore continued.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_36.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Restore continued.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_37.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Execution of tasks after the restore.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_38.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>After the restore the server will be rebooted.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_39.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>The recovered Windows 2008 R2 is started again.\n<ul><img src=\"https:\/\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2011\/01\/eadr_w2k8_40.jpg\" alt=\"EADR\" \/><\/ul>\n<\/li>\n<\/ul>\n<p>After completion the eventlogs were searched for any errors, no problems found.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>In a former blog I reported howto recover a Windows 2003 Servers with Data Protector. As Windows Server 2008 R2 is more and more used in the data center, I show within this blog howto recover a Windows Server 2008 R2 with Data Protector using the function Enhanced Automated Disaster Recovery. Preparation: Within this howto [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_mi_skip_tracking":false,"spay_email":""},"categories":[11],"tags":[97,98,66,65,64,67,96],"translation":{"provider":"WPGlobus","version":"2.8.8","language":"en","enabled_languages":["en","de"],"languages":{"en":{"title":true,"content":true,"excerpt":false},"de":{"title":false,"content":true,"excerpt":false}}},"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p28cjj-53","jetpack_sharing_enabled":true,"jetpack-related-posts":[{"id":126,"url":"https:\/\/www.data-protector.org\/wordpress\/2010\/08\/enhanced-automated-disaster-recovery\/","url_meta":{"origin":313,"position":0},"title":"Enhanced Automated Disaster Recovery","date":"6. August 2010","format":false,"excerpt":"{:en}No translation for this article available.{:} {:de} Immer wieder mal ben\u00f6tigt man es wenn ein Server komplett den Bach runter geht... \u00a0In der Regel sollte man vor einem Disaster wissen wie man seine Server wieder herstellt. In den Unterlagen von HP ist zwar sehr sch\u00f6n und ausf\u00fchrlich beschrieben welche einzelnen\u2026","rel":"","context":"In &quot;HowTo&quot;","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":3016,"url":"https:\/\/www.data-protector.org\/wordpress\/2016\/05\/prepare-and-execute-eadr-cell-server-on-windows-2012-r2-data-protector-9-06\/","url_meta":{"origin":313,"position":1},"title":"Prepare and execute EADR &#8211; Cell Server on Windows 2012 R2 and Data Protector 9.06","date":"13. May 2016","format":false,"excerpt":"{:en} In the past I often informed about the free EADR feature in Data Protector to recover clients and cell server. The last time I wrote an article in 2014 including two small scripts to get things prepared and automated - see https:\/\/www.data-protector.org\/wordpress\/2014\/04\/eadr-cell-server-dp-8-1x-windows-2012-r2\/. However, the batch files got broken due\u2026","rel":"","context":"In &quot;HowTo&quot;","img":{"alt_text":"EADR_23","src":"https:\/\/i0.wp.com\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2016\/05\/EADR_23.png?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":2190,"url":"https:\/\/www.data-protector.org\/wordpress\/2015\/01\/eadr-tape-block-size\/","url_meta":{"origin":313,"position":2},"title":"EADR and Tape Block Size","date":"1. January 2015","format":false,"excerpt":"{:en}In older articles I often wrote about Bare Metal Recovery, a feature included in Data Protector without any additional costs and called Enhanced Automated Disaster Recovery (EADR) - see https:\/\/www.data-protector.org\/wordpress\/?s=eadr. To recover the Cell Server (see link) I always told to use tape devices with a block size of 64K.\u2026","rel":"","context":"In &quot;HowTo&quot;","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":3086,"url":"https:\/\/www.data-protector.org\/wordpress\/2016\/06\/omniofflr-offline-restore-data-protector-internal-database\/","url_meta":{"origin":313,"position":3},"title":"OMNIOFFLR &#8211; Offline Restore Data Protector Internal Database","date":"1. June 2016","format":false,"excerpt":"{:en} In one of my previous articles I briefy informed about EADR for Data Protector 9.06 on Windows 2012 R2 - please refer to https:\/\/www.data-protector.org\/wordpress\/2016\/05\/prepare-and-execute-eadr-cell-server-on-windows-2012-r2-data-protector-9-06\/. However, if you don't need EADR as a complete recovery option and the preparation for disaster recovery for the IDB is required only, then you\u2026","rel":"","context":"In &quot;HowTo&quot;","img":{"alt_text":"","src":"https:\/\/i2.wp.com\/www.data-protector.org\/wordpress\/wp-content\/uploads\/2016\/06\/offlr1.png?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":1160,"url":"https:\/\/www.data-protector.org\/wordpress\/2012\/09\/recover-cell-server-reviewed\/","url_meta":{"origin":313,"position":4},"title":"Recover Cell Server &#8211; Reviewed","date":"19. September 2012","format":false,"excerpt":"{:en}In previous posts it is documented how to recover a server using Enhanced Automated Disaster Recovery Option. Tis applies to the Cell Server too, as this server might be the most important server in a case of a disaster. For the cell server there are several options available to do\u2026","rel":"","context":"In &quot;HowTo&quot;","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":431,"url":"https:\/\/www.data-protector.org\/wordpress\/2011\/03\/recover-cell-server-with-enhanced-automated-disaster-recovery\/","url_meta":{"origin":313,"position":5},"title":"Recover Cell Server with Enhanced Automated Disaster Recovery","date":"29. March 2011","format":false,"excerpt":"{:en}In article EADR with Windows 2008 R2 I described how to use Data Protector EADR for a Windows 2008 R2 server. I also described in former articles that you should be prepared when your Cell Server crashs. To be able to do EADR for your Cell Server I wrote a\u2026","rel":"","context":"In &quot;HowTo&quot;","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/posts\/313"}],"collection":[{"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/comments?post=313"}],"version-history":[{"count":19,"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/posts\/313\/revisions"}],"predecessor-version":[{"id":2853,"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/posts\/313\/revisions\/2853"}],"wp:attachment":[{"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/media?parent=313"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/categories?post=313"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.data-protector.org\/wordpress\/wp-json\/wp\/v2\/tags?post=313"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}